- Learn how to pair JBL earbuds to numerous devices.
- Learn fixes for common JBL earbud problems.
- Own JBL headphones? Read our post on how to pair JBL headphones.
This article will guide you through connecting JBL earbuds to various devices, including iPhone, Android, Mac, PC + more. At the end, you will find troubleshooting tips for common issues.
The following devices are covered:
💡QUICK ANSWER: To pair your JBL earbuds, follow these steps:
- Turn on Bluetooth on your device.
- Take the earbuds out of the case, and they will automatically enter pairing mode.
- Select the earbuds from the list of available devices on your device’s Bluetooth settings.
How To Put JBL Earbuds In Pairing Mode
Be aware that most JBL earbuds automatically enter pairing mode when turned on or removed from their case. If this is the first time connecting them, or if they do not automatically connect, you can follow these simple steps:
- Remove one or both earbuds from the case and hold the Bluetooth button on the side of one earbud for 5 seconds.
- An LED will flash to indicate that the pairing mode is active. Your earbuds are now ready to pair with your device.
Note: JBL Earbuds come with a custom-fitted carry case that allows for safe transport and storage in between usage. This case also charges your earbuds.
The carry case is crucial when pairing in Bluetooth mode, as one or both earbuds must be removed during pairing.
How To Connect JBL Earbuds
To Android
Connecting your JBL earbuds to an Android device is straightforward as they allow for ‘Fast Pairing’. Simply open the earbuds case and interact with the pop-up notification on your phone.
If this doesn’t work, you may have an older Android model (before v6.0) and will need to follow these steps:
- Ensure your earbuds are in pairing mode and open Settings on your Android device.
- Select Connected Devices.
- Remove one or both earbuds from the case and select Pair New Device.
- Select your JBL earbuds under Available Devices. Once the first earbud has been paired, the second will pair once removed from the case.
- Your earbuds will appear in the Connected Devices menu. Confirm pairing is successful by playing some audio.
Certain devices may require a 4-digit password to allow for safe pairing. The default password for JBL products is 0000. Check the manual for a unique code if this does not work.
To iPhone & iPad
Connecting to iPhone & iPad is simple (and the same process). Ensure your earbuds are in pairing mode and follow these steps:
- Open Settings on your device and select Bluetooth.
- Ensure Bluetooth is turned on. It will automatically scan for a compatible connection.
- Remove one or both JBL earbuds from the charging case, and they should appear under Other Devices. Click on your model to confirm pairing. Play some audio to ensure you have successfully paired to your device.
To Mac
Connecting JBL earbuds to MacBooks & Mac Desktops is the same. Follow these simple steps:
- Click on the Apple logo in the top left of the screen and select System Settings.
- Select Bluetooth, ensure your earbuds are in pairing mode, and you will see them appear in Nearby Devices.
- Click on them to pair and test the connection worked by playing some audio.
To Windows
Follow these steps to connect your earbuds to a Windows PC:
- Turn on Bluetooth on your PC by going to Settings > Devices > Bluetooth & Other Devices.
- Ensure your earbuds are in pairing mode. Click Add Bluetooth or Other Device and select Bluetooth.
- Select your JBL earbuds from the list of available devices.
Enter the password 0000 to complete the pairing process if prompted. - Your earbuds should should now be connected. Play some audio to test the connection.
💡 Most PCs will have an in-built function for pairing Bluetooth devices, but older models may require a Bluetooth adapter.
To Smart TV
- Open the Settings menu and enable Bluetooth mode.
- Ensure your earbuds are in pairing mode and search for Available Bluetooth Devices.
- Select your JBL earbuds from the list of available devices to initiate pairing. Enter the password 0000 to complete the pairing process if prompted.
- Your earbuds will now be paired. Confirm the pairing by playing some audio.
Note: the exact steps may vary slightly depending on the model of your smart TV. Some smart TVs may not support Bluetooth connectivity with earbuds or headphones.
JBL Earbuds TROUBLESHOOTING TIPs
Earbuds Won’t CharGe
If your earbuds won’t charge, it could be a cleaning issue.
Check the pins inside the charging case and use a microfibre cloth and very gently remove any visible dirt, dust, or other obstructions.
You’ll also see three holes where the pins insert into the buds themselves. You can remove any obstructions by gently scraping with a toothpick or fine brush. Jusy be careful not to damage and sensitive electronics inside.
If they wtill won’t charge you may have a faulty unit. Contact JBL directly or the retailer you purchased them from to arrange repair or replacement (pending warranty).
Earbuds Won’t Connect
Some earbuds may fail to connect due to a low battery in the playback device or in the earbuds themselves. Ensure that both your playback device and JBL earbuds are sufficiently charged for efficient pairing.
If your devices and earbuds are fully charged you can attempt a reset of your earbuds and/or Unpair or Forget them in your playback devices’ Bluetooth menu. After this, turn on your earbuds and perform the pairing process.
How To Reset JBL earbuds
- Ensure your earbuds are turned off.
- Hold the power button for around 10 seconds.
- Release the power button when the LED flashes.
- Your earbuds have now been reset.
Before you go, check out our article on how to pair JBL speakers.



















I have a jbl t100tws and i lost my right earbud. I wonder if I can still use it?
I have the same issue. Were you able to resolve the problem. If so, how? Thanks
Hey Yassine,
Unfortunately, you will need two earbuds to complete the pairing. You can, however, pair a new one with your existing one if you buy a replacement.
Can JBL earphone be paired with a Nintendo Switch? I can get my Tune230nc to pair with my iPhone and iPad, but not my Switch.
Hey Warren,
It’s a common issue! The Switch is notorious for poor in-built Bluetooth as it uses the SBC codec which is not great for synced audio. Many Switch users opt for the Guilikit adapter which uses the APTX (low-latency) codec.
My Jbl earbuds have a priblem. It happens every day. I take both of them out of their case at the same time and only one connects. The other one becomes its separate earbud and they become two separate things that i can connect to my phone. Only way I’ve found that i get them to connect together is by removing them from my Bluetooth completely and put them in the box and taking them out, and connecting them again in the harder way. Is there any better solutions for this or do i have to do this long “ritual” every day?
Casper, I am having the same issue.
Please how did you resolve your?
Thank you.
Hey Casper,
What a process! If this keeps happening, you can try manually syncing them. Take them out of the case and hold down the buttons on both simultaneously until the lights flash blue. It is a bit finicky and may take a few tries, but they should sync with each other after this.
My earbuds are not pairing with my Chromebook. It just keeps saying ¨Connecting failed. Try again¨
I do not know what to do. I don’t have any other headphones so I just have to listen to it out loud.
I had an old pair of Sony wired earbuds that could Bluetooth pair to both my television and my phone at the same time so if it rang it would stop the audio from my tv. I have yet to figure out how to do this with my JBL earbuds. Is there a trick
My earbuds connect but one has no sound yet it can still be used to skip songs and pause music but there is no audio from the left one
Hey Isabella,
I would try a factory reset to default settings and redo the pairing process. If this doesn’t rectify the issue, you can try manually syncing them (I posted some tips for this in a comment above ^^)
my earbuds say they are paired but I can’t get them to work
I have 2 pairs of JBL 115 tws I have lost the left ear of 1 and the right ear of the other, can I pair the separate left and right together to make them as 1 pair?
Hey Shane,
Yes, you can. Place both earbuds in the case and commence the pairing steps as usual.
Why my JBL earbuds won’t pair with my phone it says couldn’t connect
Apparently, these earbuds are more problematic than what it’s worth. I’m hoping I can return mine. Been having a problem pairing. Tried everything suggested.
how do you raise the sound level?
Hey Pat,
You can increase the volume on the device your earbuds are connected to. If you are using headphones, there will be dedicated volume buttons on one side.
Can’t get both earbuds connected to my Android phone
My right earbud won’t change!!!!
Please connect jbl blootooth buds not paired please explain ear buds pairing eachother
Hey Govindu,
There are steps above in the article for pairing earbuds together on all devices (with images).
So my JBL tunes 510 headphones were connecting fine until this morning and now they won’t connect to any devices I have followed sevral diffrent hints and tips to connect them and they still won’t connect in fact now no matter what device I use they don’t exist as a pairing option even after factory reseting them several times.
Hey Jaden,
Check out the steps in the article under ‘Earbuds Won’t Connect’. Often they need to be fully charged to rectify this issue.
Failing this, have you tried selecting ‘Forget This Device’ in your Bluetooth settings?
My earbuds won’t connect by Bluetooth because it says I need a code. Tried 0000 won’t work?
Hi Kerry,
If 0000 doesn’t work, there is often a unique code inside the manual that comes with your earbuds. Failing this, the best advice is to perform a hard reset to factory settings and attempt the pairing steps again.