- How do you pair JBL Tune 225TWS Wireless Earbuds?
- Discover features to pair and use your JBL Tune 225TWS easily
- Learn how to get the most out of your JBL earbuds
- Also, check out this handy article on pairing JBL headphones!
Do you have a set of JBL Tune 225TWS earbuds, or are you thinking of ordering some? We’ll show you how to get the most out of them.
JBL products are always straightforward to set up and use, and the 225TWS Wireless Earbuds are no exception to the rule.
We’ve laid out short and in-depth guides to pairing these wireless earbuds and an FAQ addressing the key points when using them.
Let’s get cracking!
How To Pair JBL Tune 230TWS Wireless Earbuds
Put simply by JBL themselves, you can “just open the case and start listening.”
JBL TUNE225TWS earbuds have a multifunction button on the back of each earbud. All you need to do is press and hold this button for 5 seconds on both earbuds to get them looking for your device.
If the earbuds have been charged sufficiently, they will turn on after 5 seconds of holding the multifunction button.
Both earbuds will then have a blue flashing light, meaning they will automatically start searching for connections to nearby devices via Bluetooth.
At this stage, load up the Bluetooth menu on your chosen device and look for ‘JBL TUNE225TWS’. If your device asks you for a password, enter ‘0000’.
Step-By-Step Guide (With Pictures)
- Charge the earbuds in their case (via the charging cable included).
- Take the earbuds out of the case and power them on by pressing the multifunction button for 5 seconds. Both earbuds should have a flashing blue light on their inner top side, so they have started looking for a pairing device.
- Look for ‘JBL Tune225TWS’ on your chosen device’s Bluetooth menu.
- You’re ready to use your JBL Tune 225TWS Wireless Earbuds! Hold the multifunction button on either earbud to power off for 5 seconds.
- Place the earbuds back in their magnetic holding positions in the charging case and close the lid when finished.
JBL 225TWS – Controls and Features
Dual Connect Feature
As well as the standard mode of using both earbuds simultaneously, the nifty Dual Connect feature lets you use either earbud in isolation. This can extend the product’s battery life by up to 50%.
To use Dual Connect, leave either earbud charging in its case, and take the other out to use!
Manual Controls
- Power On/Off: Press and hold the Multifunction button for 5s.
- Reconnect Earbud(s): Press the multifunction button on your chosen earbud for 3s
Button Commands (When Using Both Earbuds)
Left Earbud
- Skip Song / Next Song: Press the Multifunction Button once.
- Rewind Song: Press the Multifunction Button twice.
- Answer / End Call: Press the Multifunction button once
- Mute / Unmute Mic: Press and hold the Multifunction button for 3s.
Right Earbud
- Play / Pause: Press the Multifunction Button once.
- Voice Assistant: Press the Multifunction Button twice.
- Answer / End Call: Press the Multifunction button once
- Mute / Unmute Mic: Press and hold the Multifunction button for 3s.
Button Commands (When Using One Earbud)
Left or Right Earbud
- Play / Pause: Press the Multifunction Button once.
- Voice Assistant: Press the Multifunction Button twice.
- Answer / End Call: Press the Multifunction button once
- Mute / Unmute Mic: Press and hold the Multifunction button for 3s.
FAQs
Does JBL Tune 225TWS Have Noise Cancelling?
Unfortunately, the Tune 225TWS has no active noise cancellation – though many JBL headphones do – and isolation is non-existent.
These earbuds aren’t your best bet for keeping sound in and noise out, although their robust hardware and neat in-ear design should do the trick for the most part.
Are JBL Tune 225TWS Earbuds Waterproof?
Unfortunately, no. JBL Tune 225TWS earbuds are not waterproof or splash-proof.
What Does ‘TWS’ Mean In Earbuds?
‘TWS’ means ‘True Wireless Stereo.’ A TWS Bluetooth headset lets you listen to your audio through earbuds without wires.
The TWS system uses Bluetooth signals to transfer sound from a device to the receptive earbud(s).
This stops the connection from breaking up when there is a physical obstacle between your device and earbuds, which can often be useful.
Wrapping Up
If you’re after a straightforward, easy-to-use pair of interactive TWS earbuds, the JBL 225TWS earbuds are your soulmate.
However, with the ever-rapid expansion and evolution of True Wireless Stereo earbuds, the JBL 225TWS Wireless Earbuds are a little outdated now. They can even be hard to find on the market.
In such a case, we recommend readers check out the JBL 230NC TWS wireless earbuds, the latest wave of JBL’s True Wireless Stereo range.
We hope you found this article useful and are ready to pair!
Before you go, check out our guide to the 5 Best Invisible Earbuds!
Wondering how to pair Altec Lansing speakers? Check out our guide right here.