Odd vs Even Harmonic Distortion (What’s The Difference?)

Disclosure: We may earn a commission from affiliate links on this page, at no extra cost to you. However, all our opinions are our own.

  • What is the difference between odd vs even harmonic distortion?
  • How do overtones and harmonics work?
  • Is one better than the other?

First: A Quick Lesson On Harmonics And Overtones

To even begin discussing the differences between odd vs even distortion, we need to run through a quick lesson on odd vs even harmonics, and what overtones are.

I’ll try my best to keep this as simple as possible!

Odd vs Even Harmonics: What’s The Difference?

As the name suggests, even harmonics follow a series of 2, 4, 6, 8 and so on, and are multiplications of the root frequency. Odd (or uneven) harmonics follow a series of 3, 5, 7 and so forth.

What About Harmonics vs Overtones?

A harmonic is an integer (whole number) multiple of the fundamental frequency. An overtone is defined as any resonant frequency that exists above the fundamental frequency.

These are often confused with each other. Not all overtones fall into the harmonic series, but all harmonics are considered overtones.

Overtones Expressed In The Harmonic Series

When examining overtones in the harmonic series, we notice the following:

  • Even overtones are made up of octaves and fifths
  • Odd overtones are made of thirds, forming a dominant seventh chord.

The harmonics generated will depend on the note or chord being played, and each frequency will produce different harmonics. The harmonics heard are based on the fundamental frequency being played and produce a lower amplitude (or volume) as they increase from 1st to 8th harmonic.

The Math

As with a lot of aspects of audio production, odd and even harmonics can be calculated with some simple math.

As mentioned above, both are just multiplications of the fundamental frequency, where odd harmonics will increase in multiples of 3, 5, 7 etc and even harmonics in multiples of 2, 4, 6 etc.

So, if we have a tone of 440Hz playing (an A), we can calculate that the odd harmonics will be 1320Hz, then 2200Hz because we are multiplying by 3 and then 5.

The even harmonics, in this case, would be 880Hz, then 1760Hz etc.

Think of these harmonics (or ‘overtones’) as frequencies that add character and define the timbre of the sound.

The addition of harmonics makes for a much more interesting sound (which is why the sound of distortion is actually pleasant to listen to).

Now with that out of the way, let’s discuss odd vs even harmonic distortion.

Odd vs Even Harmonic Distortion

We’ve talked recently about tube vs solid-state pre-amps, their characteristics and the harmonics they create.

The sound of harmonic distortion in your mixes can greatly affect the timbre and feel, so it’s worthwhile getting to grips with identifying them and how they will impact your workflow (as well as knowing how they behave in order to tame any trouble frequencies).

What is Harmonic Distortion?

A good way to picture what harmonic distortion looks like is first to imagine a sine wave. A sine wave will oscillate with a consistent amplitude and frequency (think of hitting a key on a synthesizer without any effects or processing on it). They are clear, constant notes which in musical terms are pretty boring to listen to.

By adding distortion to a sine wave we are actually manipulating the wave itself so that it no longer follows a strict oscillation.

This is why when you see a waveform in your DAW it looks like a ‘scribble’, because (unless you are recording a sine) the wave won’t follow a set path as it oscillates.

When we add distortion to a sine wave (or cause it to overdrive) a clipping effect is created. The more distortion we add (or the more saturated the sound becomes) the more harmonics are produced.

Any tone you play will have a ‘fundamental frequency’. If you play an ‘A’ on a guitar, for example, the fundamental frequency will correspond with this note, however, you won’t just hear the A, you will hear lots of other frequencies around it on the spectrum.

If you insert a frequency analyzer plugin onto an instrument track this will give you a good idea as to what the fundamental frequency is.

If you’ve ever seen a vibrating guitar string under a powerful light you’ll notice it doesn’t vibrate equally, the patterns on the string will change as the string rings out.

While this doesn’t represent harmonic distortion, it does make it easier to understand that there isn’t just one frequency playing, rather there are several (as illustrated by the different vibrations and patterns in the string).

Think of harmonics as ‘other frequencies’ that surround the fundamental frequency.

Odd Or Even?

So we know that harmonics are produced when distortion is applied, however, these harmonics aren’t random. Depending on the type of distortion, we can manipulate whether odd or even harmonics are produced.

Let’s say we are cranking our tube amplifier on a high gain channel. Tube distortion is synonymous with warmth and clarity. This is because the tubes create even harmonics which sound subtler and rounder.

Conversely, if we then turn on our solid-state amp and do the same, the distortion will produce odd harmonics which are often described as grittier and more aggressive in tone.

You’ll often hear guitarists claim that tube amps are far superior to solid-state, though to be frank, beauty is in the ear of the beholder. There is no right or wrong answer here. I recommend checking out our article on tube vs solid state preamps for more info on that debate.

Is One Better Than The Other?

Audio production is never straightforward, there, unfortunately, is no ‘better or worse’ when it comes to harmonic distortion!

Our ears naturally pick up on even-order harmonics, we’re able to interpret them as more “musical” than odd-order harmonics but that doesn’t mean that odd-order harmonic distortion doesn’t have its place. Sometimes that edgy grit and unstable aggression that you get from odd harmonic distortion is just what you need for a track.

As always, experiment with each and learn what each can offer to improve your mixes and achieve the sound in your head.


Become A Master Of Overdrive

Check out this brand new course from Noiselab!

Lesson topics include:

  • Overdrive and Circuit Drive
  • Saturator and Waveshaping
  • 808 Bass Saturation
  • Saturation and Drive in Synthesis
  • Echo Overdrive and Spatialization
  • Filtered Saturation
  • Controlling Dynamics
  • Vocal Enhancement
Disclosure: Enjoyed the read and want to support an independent publication? Head to our store and pick up an attractive art print, mousepad or sample pack to help us keep the lights on! We may also earn a commission from affiliate links on this page too. Thank you for your support.
Avatar photo
Kieran Whitehouse

Kieran is a producer based in Manchester. He has written, produced and recorded for BBC Radio, mixed tracks from Kendall Calling Festival and worked on broadcast sessions for national TV. Kieran is also a guitarist and has performed across the UK.

8 Comments

  1. This is of interest to me because my hearing aids distort a short range of notes on my piano. It took some time to identify the problem because the Yamaha technician maintained the piano sounded fine. Eventually it became apparent that two family members with hearing aids heard harsh sounds from the note range in question and two other family member with more youthful hearing heard normal sounds from that range.

    Why would hearing aids have this effect.

    • I’m going to guess it’s internal resonance and lack of of headroom. Resonance will make some frequencies or some region of frequencies louder than others. This can overload the mic, amp, or speaker in your hearing aid. Likewise, if the hearing aid is designed to boost a certain frequency range, it might not have enough headroom when that range becomes loud. Does it still distort if you turn down the volume on your hearing aid? If you have access to a quality microphone and quality headphones, you might consider using those to hear while you play piano.

    • I also wear hearing aids. Typically different types of hearing aids have different numbers of frequency bands that they are broken up into for their processing. More expensive = more bands = better sound. Some under 10 bands, some more. I noticed a higher audio quality when I upgraded to the top ones in my chosen brand. You can imagine that more bands gives the hearing aids more fine-tuning control over what they do. Each band has multiple processes that happen, including volume automation, multiple versions of noise reduction, compression, limiting, eq, and auto-adjustments of various parameters based on your environment and noise levels around you. In other words, it’s highly likely that there are a few frequencies that are not processed in an entirely natural sounding way. My hearing aids are essential for everyday life but I don’t use them when mixing and making music, for that I’m working mostly on headphones. You can get certain “music” presets for some hearing aids, which disable compression, have a flat eq etc. I haven’t found them to be much better.

  2. 1) in a tube push-pull amp , the even order harmonics cancele out , and odd harmonics are created . This is because the even harmonics replicate symmetrically on both phases ( in push and pull ). All sounds in nature are based on even order harmonics and is more pleasant . Odd harmonics are largely considered as not pleasant to the ears .
    So , apart from achieving higher amplification levels , we loose out on the timbre of the audio content by push pull method . This Timbre on tibe amps , which is acknowledged to be euphoric, is the primary attraction in tube amps .

    So question is : why don’t we stick to SET which does not suffer from this even order harmonic cancellation ?

    2) can we obtain higher amplification power , by any method in SET ?

    3) is the reason of generation of substantial amount of even order harmonics in triodes , due to the lack of screen plates ?

    • I have exactly the same thoughts. Surely the only true even harmonic generating tube power amp stages are things like the fender champ? Or do other factors come into play like preamp distortion and imbalance in the power tubes or gain of each phase? My vox ac30 for example sounds great. Is that generating even harmonics?

  3. Wow, you got one thing right – odd and even harmonics can be calculated with some simple math. The math you are looking for is The Bullard Harmonic Solution which gives you the AMPLITUDES of the harmonics created by any particular distortion, not some vacuous theory. It’s pretty obvious you are just guessing, but I am not, I know PRECISELY how harmonics are created. All this stuff about tubes vs transistors is rubbish, as I have worked on both for 4 decades. You need to learn The Bullard Laws Of Harmonics.

Leave a Reply

Your email address will not be published. Required fields are marked *