Basics Of Compression: A Visual Guide to Better Mixdowns

Disclosure: We may earn a commission from affiliate links on this page, at no extra cost to you. However, all our opinions are our own.


As a beginner in audio production, understanding compression is crucial for achieving professional-sounding mixes.

In this article, we review the basics of compression, highlighting use cases, what the dials all do, and the different types of compressors. I’ll also share some personal tips that I’ve amassed over my years mixing records for clients.

Key Takeaways

  • Much like EQ, compression can be used as a correctional tool, and a creative tool.
  • Compression controls the dynamic range of a signal, allowing you to increase the overall volume of a track without clipping or distortion.
  • The compressor has several adjustable parameters, including threshold, ratio, attack, release, and makeup gain, which can be used to tailor the effect to the specific needs of the track.
  • It’s important to use compression judiciously and to listen carefully to its effect on the sound. Excessive compression can lead to a loss of dynamics and a flattened, lifeless sound.
This infographic explains the various dials located on a standard audio compressor.
This infographic explains the various dials located on a standard audio compressor.

Understanding Compression: The Nightclub ANalogy

Audio compression is like a bouncer at a nightclub. Just like a bouncer controls the flow of people entering and exiting the club, a compressor controls the flow of sound in an audio signal.

Let’s use this analogy to explain each of the controls on a compressor:

Threshold

graphic explaining threshold in audio
Threshold refers to the point at which the compressor starts to reduce the volume of an audio signal.

The nightclub’s max capacity is the same as a compressor’s ‘threshold‘.

The bouncer’s job is to make sure that the capacity does not go over its maximum limit, much like a compressor’s job is to ensure volume levels don’t go over a certain threshold.

When the nightclub gets too crowded, the bouncer stops letting people in, just like how a compressor reduces the volume of the louder parts of an audio signal. This helps to keep the overall volume level of the song consistent (and the nightclub sufficiently packed).

Similarly, when the nightclub starts to empty out, the bouncer lets more people in to keep the party going, just like how a compressor increases the volume of the quieter parts of an audio signal.

Ratio

infographic showing how compression ratio affects output level.
As shown by the graph above, a compressor’s ratio increases the severity of output level reduction.

Just like how a bouncer can be adjusted to be more or less strict, a compressor can be more or less aggressive. By adjusting the compressor’s settings, you can control how much it reduces or increases the signal’s volume and tailor it to the specific needs of the song.

Attack

In the bouncer analogy, the attack and release controls on a compressor can be compared to how quickly the bouncer responds to changes in the crowd.

The bouncer’s reaction time to changes in the crowd, is akin to the compressor’s attack control, which defines how quickly the compressor responds to the threshold being met.

If the attack time is fast, the compressor will start reducing the volume of the audio signal almost immediately after it crosses the threshold. This can be useful for controlling sharp, transient sounds such as drums or percussion.

If the attack time is slower, the compressor will take longer to start reducing the volume of the audio signal. This can be useful for maintaining the natural dynamic range of the audio signal, while still providing some level of compression.

Release

In the bouncer analogy, the release control on a compressor can be compared to how long the bouncer holds the crowd back before letting them back in.

Similarly, in audio production, the release control determines how quickly the compressor stops reducing the volume of the audio signal once it falls below the threshold.

A slower release time means the compressor holds the volume reduction for longer before letting the signal return to its original volume.

A faster release time means the compressor releases the volume reduction more quickly, allowing the signal to return to its original volume sooner after the level drops below the threshold.

infographic showing how attack and release work on a compressor.
To summarize, the attack phase is how quickly it takes for the compressor to engage gain reduction. The release phase is how quickly the compressor restores the gain reduction.

Knee

‘Knee’ in compression refers to the way a compressor transitions from no compression to full compression as the signal level crosses the threshold.

A compressor with a hard knee will only start compressing the signal once it crosses the threshold, while a compressor with a soft knee will gradually start compressing the signal as it approaches the threshold.

The choice of knee type depends on the desired effect and the specific audio signal being processed.

Understanding: Dynamic Range

Dynamic range refers to the difference between the loudest and quietest parts of your audio. The higher the compression, the less the dynamic range. ‘Dynamic range compression’ is a type of compression, which you can read more about here.

Dynamic range is an extremely important concept to understand in audio, and the foundation of how compression works.

  • Generally, a track with a “good mixdown” will strike a balance between dynamics and presence.
  • Whether you lean more towards “in your face” presence or “airy” dynamics will depend on the style of the track.

Dynamics can help to create impact and an element of surprise in your mixes. We’ve all seen horror movies where a softly spoken scene is interrupted by a loud jump scare from a ghost or monster.

When the speech is the same volume as the monster, it lacks impact. The same principle can be applied to music.

Compression: When To Use It & Use-Cases

Audio compression is a versatile tool that can be used in various ways in music production. Here are some common use cases for audio compression:

Controlling Dynamic Range

Compression can be used to reduce the difference in volume between the loudest and softest parts of an audio signal, creating a more consistent and balanced sound. This is what’s known as dynamic range compression.

Adding Sustain

Compression can add sustain to instruments like guitars or pianos, making notes ring longer and creating a more full-bodied sound.

Emphasizing Transients

Similarly to transient shapers, compression can emphasize the transient peaks of a sound, like the attack of a snare drum or the pluck of a bass guitar, creating a more punchy and defined sound.

graphic explaining what transients are in an audio waveform.
Transients in audio refer to the initial, short-lived bursts of sound that occur when a sound is first produced, such as the attack of a drum or guitar string.

Creating A Sense Of Space

Compression can create a sense of space in a mix by bringing elements into the forefront or pushing them into the background. This is achieved by manipulating the overall RMS (average power) of the signal.

Adding Character

Compression can add character and color to a sound! Vintage compressors like an API-2500 or a UA-1176 impart their own unique sound and distortion, which can warm up an otherwise sterile track.

Types of Audio Compressors

There are four primary types of compressors to be aware of:

  • FET
  • VCA
  • Optical
  • Variable MU

For a deeper dive into each of them, check out this post.

Infographic detailing the primary types of audio compressors.
Infographic detailing the primary types of audio compressors.
Compressor TypeProsConsGreat On
FETFast attack time, transparent sound, good for drums and percussionLimited control over release time, can be harsh on some sourcesDrums, percussion, electric guitar
VCAPrecise control over attack and release times, low noise floor, versatileCan sound sterile or clinical, not as warm as other typesVocals, bass guitar, mix bus
OpticalSmooth, natural sound, forgiving on transients, adds warmthLimited control over attack and release times, can be noisyVocals, acoustic guitar, bass guitar
Variable MUWarm, vintage sound, adds harmonic distortion, forgiving on transientsSlow attack and release times, limited control over compression ratioMix bus, mastering, tape emulation

Helpful Resources On Compression

Compressor Gear Guides

Further Compression Tutorials & Guides

FAQ

How Can I Master Compression?

Pro engineers might tell you to use your ears and only compress a track when needed. This is useful advice if you’re an experienced mixer, but if you’re new to production — you may be in the dark about when to compress.

This is why we stress placing a compressor on everything, every chance you get! This is because the quickest way to become familiar with how something works is to use it liberally.

Tweak the parameters to the extreme and see if you can tell the difference. A/B’ing, or comparing your uncompressed/compressed signals is a great way to learn.

Compression made My Vocal Sound harsh!

Yep, this is a common issue, and a prime example of when you’ve likely applied too much. Over-compressing can result in bringing out unwanted sibilance (emphasized ‘sss’ and ‘t’ sounds).

You can also use compression in conjunction with a de-esser, to help tame the sibilant frequencies after the signal has been compressed. This works great on drum overheads and guitars, as well as vocals!

Disclosure: Enjoyed the read and want to support an independent publication? Head to our store and pick up an attractive art print, mousepad or sample pack to help us keep the lights on! We may also earn a commission from affiliate links on this page too. Thank you for your support.
Avatar photo
Sean Fitzjohn

Sean is a Co-founder & Editor In Chief at Producer Hive. Under the moniker Commit, he has released deep, downtempo music on renowned labels such as Deep Heads and Interchill Records, charting in the top 3 on the Juno Download and Beatport dubstep charts on multiple occasions. His tracks received strong support from figureheads in the scene such as Laurent Garnier, and has performed alongside numerous high-profile DnB and Dubstep acts, including Truth, Phaeleh, and Kryptic Minds. Sean also ran his own mixing and mastering services. As a Top Rated Seller on Fiverr, he helped hundreds of musicians with their mixes, and achieved a consistent 4.9/5 stars over the course of his work there.

Leave a Reply

Your email address will not be published. Required fields are marked *