Sample & Hold (Explained, With 6 Creative Use-Cases)

Disclosure: We may earn a commission from affiliate links on this page, at no extra cost to you. However, all our opinions are our own.

  • Find out the origins of sample & hold and how it works
  • Discover 6 ways to creatively use sample & hold in your music
  • Learn about the synthesizers that popularized its usage.

Sample & Hold: A Quick History Recap

The actual technology of sample and hold was brought to market in the late 1950s as a means to improve data acquisition. In the audio world, this is commonly associated with how analog-to-digital converters (ADC) work.

Technology was rapidly evolving — transistors were on their way out in favor of vacuum tubes, and sample and hold technology quickly became all the rage among ADC manufacturers.

However, it wasn’t until the Buchla 100 modular synthesizer (produced in 1963) that the feature was brought to electronic music production. The Buchla 100 was one of the first modular synthesizers to be commercially available and was used by many pioneering electronic musicians, notably Morton Subotnick, Suzanne Ciani, Pauline Oliveros, and Laurie Spiegel.

Fast forward to today, and sample and hold features are widespread in many synthesizers. Its techniques can be heard in musical works spanning genres and decades, including the likes of Brian Eno and Jean Michel Jarre, to Aphex Twin, Daft Punk & The Haxan Cloak.

How Sample & Hold Works In Sound Design

Sample and hold takes a sample of a sound, and then holds it at a certain level for a period of time before moving on to the next sample.

Still confused? Let’s dive in deeper, with a theoretical example:

  1. Imagine you have a sinewave, and it takes 5 seconds to reach the end before the cycle resets.
  2. Sample and Hold will “sample” a specific point within the duration of that wave every X period of time, and then “holds” that value until the next sample is taken.
  3. For instance, if the wave ranges from 0 to 10 units, and the circuit samples it every second, it will sample the wave at 2, 4, 6, 8, and 10 units.
  4. The circuit will then hold each value until the next sample is taken, which means it will output the value of 2 for a full second, then the value of 4 for a full second, and so on.

Here are some quick notes on how it all comes together in practice:

  • Sample and hold is often used in conjunction with other synthesis techniques such as modulation and filtering.
  • The rate at which the samples are taken can be controlled by an external source, such as an LFO or an envelope generator.
  • Given that your synthesizer allows for it — you can have the circuit triggered through a clock signal, a trigger signal, or an input signal.

Modulate the rate to taste, and voila — instant generative bliss at your fingertips!

Oh, and if you can’t see ‘Sample & Hold’ anywhere on your synthesizer, it’s likely named something else. More often than not, it’s a parameter in your LFO called ‘Random’. It’s called ‘random’ because that’s basically what it is — a means of achieving seemingly random modulation control!

Every synthesizer is unique and will have its own workflow, features, and limitations. As a result, many producers gravitate to modular synthesis for its free-form approach to building out their feature set. Check out our full guide on how to get started with modular synthesis for more info on that topic.

Understanding The Circuitry

For those wanting to understand the electronics side of it all, you can think of ‘Sample’ and ‘Hold’ as two separate stages.

Step 1: Sample

The sample circuit takes an input voltage and holds it for a short period of time. A capacitor is charged to the input voltage when a sample signal is received, which then holds this voltage level until the next sample signal is received.

Step 2: Hold

The hold circuit maintains the voltage level captured by the sample circuit. This is typically done using a switch that connects the capacitor to an output buffer amplifier. When the switch is closed, the voltage level held by the capacitor is transferred to the buffer amplifier and is output as the sampled voltage.

6 Creative & Musical Ways To Use Sample & Hold

How you use sample and hold is bound only by your imagination. Here are six creative ideas to get you thinking about its possibilities:

1. Creating Rhythmic Patterns

By using a sequencer to trigger the sample and hold module, you can create rhythmic patterns that repeat (and change) over time. Adjusting the rate at which the samples are taken and held, the rhythm can be sped up or slowed down, creating highly dynamic patterns.

2. Adding Randomness

Sometimes, the best way to get inspired is to simply let the machines take control. Sample and hold can be used to add an element of randomness to a track, adding all sorts of wonderful unpredictability that you wouldn’t have otherwise ever come up with yourself. Get as chaotic as you like!

3. Adding ‘Human’ Feel

Randomness doesn’t always have to equate to chaos. Adding subtle amounts can make sequenced patterns feel more human. Apply this technique to robotic and ‘static’ synth patches to let their ‘human imperfections’ shine.

4. Modulating Other Parameters

Sample and hold can be used to modulate other parameters in a synthesizer, such as filter cutoff or oscillator pitch. By using an LFO to control the rate at which the samples are taken and held, you can create some interesting movement. Another idea is to modulate the pitch by feeding in white or pink noise. This will produce a barrage of glitchy and chaotic bleeps synonymous with sample and hold.

5. Creating Evolving Textures

By combining sample and hold with other synthesis techniques, such as filtering and modulation, producers can create evolving textures that change over time. By modulating the rate at which the samples are taken and held, the texture can evolve unpredictably, creating a sense of movement and progression. With sample and hold, you can quickly and effortlessly turn a generic atmospheric pad into one with much more character.

6. Creating Unique Lo-Fi/Distorted Sounds

Sample and hold can be used to create grainy, lo-fi sounds by introducing random variations into a signal. When a voltage level is sampled and held, the resulting sound can be affected by noise and other sources of interference. Additionally, lowering the sample rate of the ‘sample and hold’ can create an output effect similar to ‘bitcrushing’ or ‘sample rate reduction‘.

Notable Synthesizers That Popularized Sample & Hold

As mentioned, the Buchla 100 brought sample and hold to the mass market. However, other notable synths helped popularize the feature. Here are a handful of them:

  1. Moog 15 & 55: Two modular synthesizers that were introduced by Moog in the ’70s.
  2. ARP 2600: The ARP 2600 was a popular semi-modular that debuted in 1971, manufactured by ARP Instruments.
  3. EMS VCS3: A vintage analog synthesizer introduced in 1969 by Electronic Music Studios (EMS).
  4. Roland SH-101: A popular monophonic synthesizer brought out in 1982 by Roland.
Disclosure: Enjoyed the read and want to support an independent publication? Head to our store and pick up an attractive art print, mousepad or sample pack to help us keep the lights on! We may also earn a commission from affiliate links on this page too. Thank you for your support.
Avatar photo
Sean Fitzjohn

Sean is a Co-founder & Editor In Chief at Producer Hive. Under the moniker Commit, he has released deep, downtempo music on renowned labels such as Deep Heads and Interchill Records, charting in the top 3 on the Juno Download and Beatport dubstep charts on multiple occasions. His tracks received strong support from figureheads in the scene such as Laurent Garnier, and has performed alongside numerous high-profile DnB and Dubstep acts, including Truth, Phaeleh, and Kryptic Minds. Sean also ran his own mixing and mastering services. As a Top Rated Seller on Fiverr, he helped hundreds of musicians with their mixes, and achieved a consistent 4.9/5 stars over the course of his work there.

Leave a Reply

Your email address will not be published. Required fields are marked *