The 5 Best Behringer Pedals That Money Can Buy

• What are the best current Behringer pedals?
• Can I use Behringer pedals on other instruments besides the guitar?
• Which Behringer pedals work best together?

---

Are you trying to build your dream pedalboard but don’t want to break the bank? If so, you may be looking around for some cost-friendly pedal manufacturers. Behringer is one of the more recommended names for these products, and their pedals are well worth checking out. 

Behringer has released a healthy variety of guitar pedals (amongst other products) since their formation in 1989, and it can be tricky for several players to decide on their best unit. We’ve put together a list of our personal top 5 Behringer guitar pedals. 

These pedals all work well alongside each other, on their own, and can easily fall into any pedalboard you might be currently building. 

What are the Best Behringer Pedals? 

Our pick for the best overdrive is the Behringer VT999 Vintage Tube Monster Overdrive Pedal. An awesome sound tube preamp that can act as an amp substitute and offers a wonderful scope of distortion options to users. 

The Behringer UC200 Ultra Chorus Pedal is a very enjoyable and surprisingly vibrant chorus generation for its asking price. This pedal offers all the fundamental user controls needed for precise sound sculpting. 

The best multi-effects pedal is the Behringer Digital FX600. This a solid purchase for anyone that needs a multitude of guitar effects on a budget or is still wanting to learn about effects before buying singular units.

Our list of the 5 Best Behringer Pedals reads as follows:

1. Behringer VT999 Vintage Tube Monster Overdrive Pedal
2. Behringer DR600 DIGITAL REVERB  
3. Behringer UC200 Ultra Chorus Pedal
4. Behringer VINTAGE PHASER VP1 
5. Behringer Digital FX600 Multi-Effects Pedal

1. Behringer VT999 Vintage Tube Monster Overdrive Pedal

Specs

• Type –  Tube Distortion
• Power: DC 9V 
• Dimensions: 8.66’’ x 6.77’’ x 2.4’’
• Weight: 3.0lbs

Review

Behringer’s most costly guitar pedal is also their finest unit to date. The VT999 is a tube-powered overdrive pedal that offers a healthy range of distortion ranging from smooth, warm saturation to more screeching fuzz tones. 

The VT999 operates using a 12AX7 vacuum tube and a solid-state circuit board. This analog combo creates a much more dynamic tonal response than digital circuitry can provide. Traditionally, the 12AX7 has been used primarily to power HiFi and guitar amplifiers for names like Fender and Vox, and it’s equally reliable inside the VT999 sturdy brass casing. 

Included on the VT999’s user interface is a single gain knob (which either increases or reduces the amount of power passed through the pedal’s tube). A handy 3-band EQ allows users basic sound shaping controls, and a threshold dial determines the input volume level required to activate the effect. 

The most useful feature on the VT999 is probably the noise gate, especially if you like to crank your gain to high heaven. The pedal also uses a true-bypass system, which is ideal for anyone that builds larger setups and wants to keep a strong bypass signal. There’s no real downside to the VT999, and even if more expensive units can offer higher-quality distortion, this pedal performs very effectively at its asking price. 

2. Behringer DR600 DIGITAL REVERB

Specs

• Type –  Reverb
• Power: 1 x 9V Battery
• Dimensions: 2.76’’ x 2.13’’ x 4.84’’
• Weight: 0.73lbs

Review

The DR600 is a truly ambitious reverb pedal that Behringer punt as having a ‘’studio-grade’’ reverb. While this claim might be a stretch (particularly for seasoned tone-heads and players), the DR600 does pack a few fun and novel reverb settings that work well for live performances, rehearsals or jam sessions, or simple home practice. 

The DR600 features six reverb modes: Spring, Plate, Gate, Room, Hall, and Modulate. Each of these modes is generated using digital processors, and the pedal does well to generate tonal definitions between each reverb type. The Gate reverb is particularly enjoyable, especially if you’re into sharp, glassy reverb tones that you’ll hear on records by Prince, The Smiths, or Bowie. 

Users can access all the essential shaping controls on the DR600 pedalboard interface. The pedal comes with time and tone dials to fine-tune your reverb’s decay and character, as well as a level knob for blending your reverb and dry signal. The DR600 also comes with dual outputs, which means all your reverbs are delivered in stereo format. 

3. Behringer UC200 Ultra Chorus Pedal

Specs

• Type:  Chorus 
• Power: 1 x 9V Battery
• Dimensions: 2.76’’ x 2.13’’ x 4.84’’
• Weight: 0.73lbs

Review

The UC200 chorus pedal from Behringer is one of their most popular sellers and provides a fine balance of tonal quality, versatility, and usability in one unit. The pedal offers no user presets, instead allowing users to finely sculpt their chorus tone using the onboard parameter dials, all of which offer enough user control for most player requirements. 

The user interface on the UC200 comprises four dials. Rate and Depth determine most of the modulation of your chorus behaviors according to speed and blend. The tone knob lets you bring up certain frequency regions of your input signal that you’d like the chorus to emphasize and can be used to tweak your chorus’ overall character. 

The UC200 has dual outputs to give your chorus the full stereo effect. One addition we would have loved to see in this pedal is a tap tempo function built into the stomp unit. The plastic casing on the UC200 may feel cheap to some users, but that’s not a reflection of the tonal quality this pedal can generate. 

4. Behringer VINTAGE PHASER VP1 

Specs

• Type: Phaser 
• Power: 1 x 9V Battery
• Dimensions: 5.59’’ x 3.07’’ x 3.39’’’
• Weight: 0.84lbs

Review

Phasing is a very hit-or-miss effect with many guitar players. You either love it, or you don’t; there’s often no middle ground. Any fans of this riveting effect should find the VP1 to be a simple but effective device that works great on guitars and also through keyboards, organs, and synthesizers. 

The VP1 functions using a single dial to either increase or reduce the rate of phasing introduced to your input signal. Users can alter between two tonal modes using the Color switch on the back of the pedal. The pedal also includes a true-bypass mechanism, which helps maintain signal strength even over larger pedalboard setups. 

Given that phasing is such a complex modulation effect, this pedal would have been exceptional with a few more fundamental user controls, like feedback, depth, and mix. However, the overall scope of sounds that the VP1 generates is enjoyable and surprisingly versatile.

The VP1 guitar pedal can be powered by a 9V battery which is prime if you’re looking to add to your busking setup or are running short of power ports from your pedalboard supply. However, the pedal’s performance is significantly improved when using DC power (unfortunately, adapters for this are sold separately). 

5. Behringer FX600 Digital Stereo Multi-Effects Pedal

Specs

• Type: Fuzz Distortion
• Power: 1 x 9V Battery
• Dimensions: 2.76’’ x 2.13’’ x 4.84’’’
• Weight: 0.73lbs

Review

Anyone looking to substitute their pedalboard for a more compact, simpler setup may want to investigate the FX600. The pedal offers a healthy selection of multi-fx that can also build a solid learning foundation for anyone that is still learning the fundamentals of guitar effects and how to apply them. 

There are a generous six stereo effects packed into the Behringer FX600, which is impressive considering its single stomp design and smaller housing. These effects include a Tremolo, Phaser, Chorus, Flanger, Delay, and Pitch Shifter. 

Users switch between their desired effect type using the onboard FX dial, and two additional parameter controls shift function depending on your chosen effect. A Level knob determines the mix between your dry and processed signal, and the pedal comes with a status LED to show for on/off and battery status displays. 

What’s notable about the FX600 is that it offers two input dials and stereo outputs. This type of routing opens the pedal up to use beyond the guitar, and its simple user interface creates a seamless and minimalist workflow. 

While the FX600 is probably not going to find its way to any big stage performances or studio recordings, it does offer an intriguing range of tonal and effect options for beginner players and anyone with budget restraints. 

What To Consider When Buying Behringer Guitar Pedals

Purchasing the right pedal is not as simple as a plug-and-play type test (although you should try out your pedals before buying them). There are a handful of factors to consider when buying a new guitar pedal. We’ve laid these considerations out below:

1. Sound – The most important factor is how your desired pedal will sound with your guitar and gear. Consider how your pedal will alter any pedal chain or amp you already use and if these changes will be worth the result. 
2. Power – Some pedals require more power than others, and some are simply volatile in any unstable electronic setups. Consider whether you’re able to comfortably accommodate the power requirements of your pedal before purchasing it.
3. Ergonomics – Size, weight, and the user interface layout all determine the usability of your pedal. Great pedals should come with hardy stomp buttons and durable, easy-to-handle knobs or controls.
4. Frequency Of Use – This factor is often overlooked but crucial to your overall workflow and creativity. It’s always important to consider how often you’ll use a guitar pedal before purchase. It’s also important to consider how much of the pedal’s capabilities you will use. For instance, it’s redundant to purchase a multi-effects pedal if you only wish to use a single sound, setting, or preset. 

Final Thoughts

Behringer has created a line of accessible guitar pedals that can offer many players a simple but effective means of enhancing their tonal arsenal. Building the ideal pedalboard is a never-ending journey for many guitar players, and the ride is often as rewarding as the destination. Essentially, Behringer pedals are a pretty solid guitar pedal option – for use while you save up for something more high quality. 

With that thought in mind, the usability and value for money that Behringer only adds to the endearing nature of their products, including guitar pedals. They work well on their own and also play pretty well with most other pedals. You can use the list above as a basic guideline before deciding which Behringer guitar pedal is the best option. 

FAQ

Are Behringer pedals analog or digital?

Essentially, Behringer guitar pedals use a combination of analog and digital technology to generate their sound. Sound is converted into a digital signal through the pedal’s digital circuit board once it has entered the pedal and exits in the same format. 

Are all Behringer pedals copies of famous models?

Yes. Most Behringer pedals have been modeled off of pedals made by companies like Boss or Line 6. 

Are all Behringer pedals battery-powered?

Not all Behringer pedals are exclusively battery-powered. Certain Behringer pedals use a 9V DC power adapter, and some offer both battery and DC power as options in a single unit.