While there are many types of speakers suited for DJ’ing, only a few types of speakers can deliver enough volume to reach everyone in the room.
PA speakers are considered the most ideal for events and parties — they reproduce full-range audio, have ample dynamic range, and are designed to play continuous sound for hours on end.
This article features a list of the best DJ speakers for house parties. Each speaker on the list was selected based on the following criteria:
Great sound quality
Sufficient (and modern) inputs and outputs
Active power, removing the need for a receiver
Value for money
Long day? Attention span nearing record lows? Fear not! We have condensed this article into a snappy visual story guide! Check it out here.
What Are The Best DJ Speakers For House Parties?
Our pick for the best DJ speakers for house parties is the Yamaha DBR10. It has superb highs and lows and a 129 Db SPL rating, which is loud enough for most events.
If you’re looking for a DJ speaker that has an affordable price tag, the Electro-Voice ZLX-12P might be a suitable choice for you. And finally for those looking for something with that little bit extra, the Proreck Club 3000 is our premium choice for this list.
Overall, here are our top picks for the best DJ speakers for house parties:
Yamaha is very popular in the audio equipment game, and the Yamaha DBR10 is a great example of why this company thrives. When it comes to speakers, Yamaha offers the DXR, DBR, and DSR series.
The Yamaha DBR10 is a cheaper alternative to the DXR and DSR series. It has well-defined mids and highs with a nice warm sound and that’s why it’s our top pick for the best DJ speakers for house parties.
1” tweeter and 10” woofer
Class D amplification
Internal 2-channel mixer
For starters, the Yamaha DBR10 cabinet has a plastic case with angled rear corners so that it can double up as your floor speaker. It also has a steel grill with some angled edges, adding some depth to the front face.
The Yamaha DBR10 packs a 1-inch compression driver and a 10-inch woofer with a bi-amp design. The woofer is powered with one amp, and the tweeter is powered by a separate amplifier. As a result, the speaker delivers a balanced and clean sound.
With a frequency range of 55Hz-20kHz, this speaker is quite effective at covering both high and low frequencies.
In terms of coverage angle, the key selling point is the 90° horizontal angular spread and the 60° vertical angular spread, which disperses sound effectively to reach different parts of the room.
The Yamaha DBR10 can deliver 129dB SPL, making it easier for you to play music that doesn’t break up, even at loud volumes.
Another well-established company on the list, Electro-Voice has been manufacturing high-quality gear since 1927, and the Electro-Voice ZLX-12P is no exception.
With the capability to cover a wide range of frequencies effectively, the Electro-Voice ZLX-12P offers good sound quality at a cost-effective price.
12” woofer and 1.5” compression driver
Class D amplification
Line XLR, microphone, and combo jack inputs
90° x 60° dispersion angle
Manufactured from polypropylene and steel, the ZLX-12P’s cabinet is quite durable and also features carrying handles, making it easier for you to move it from one place to another.
With multiple presets, this speaker offers you varying frequency responses. Examples of such preset modes include club, music, speech, and live.
The music preset mode has a frequency range of 80Hz-20Hz, giving you a well-defined representation from the lower mids and above, however, you may want to pair these speakers with a subwoofer to make up for the roll-off around 80Hz.
Since the Electro-Voice ZLX-12P has a 126dB SPL, it is suitable for different venues, including medium-sized outdoor venues.
While Proreck is not as popular as other big brands such as Yamaha or Electro-Voice, they know their way around speakers and have been issuing solid audio gear for a while now.
The Proreck Club 3000 is an all-in-one system that features 4×4’’ array speakers, subwoofers, and speaker stands. It might be ideal for you if you are looking for an all-round performer.
4000 Watts peak power handling
Master volume control and separate volume controls for subwoofer
Unlike other DJ speakers, the Proreck Club 3000 comes with telescopic stands, which can be extended to a height of about seven meters for mounting the monitors.
Thanks to the eight mid-tweeters and eight tweeters, this powered speaker produces a crisp, clear loud sound. Moreover, it has a frequency response of 40-20kHz, which presents vocals and music perfectly.
Since the subwoofers are manufactured from a sturdy MDF material, the sound produced is generally free from distortion. The subwoofer has a built-in amplifier and a 50Hz magnet for magnifying signals to produce deep, rounded bass tones.
The Proreck Club 3000 also features superb Bluetooth connectivity functionality, letting you connect Android devices and Apple devices.
When it comes to connections, this powered speaker offers you one stereo 6.35 mm input, one stereo RCA input, and two mono XLR inputs for connecting microphones.
Since this system comes with various speaker cabinets, it might be rather heavy for some users.
Established in the late 80s, Mackie offers most of their audio equipment at an affordable price, creating a balance between price and quality.
Plus, Mackie has always been known for incorporating unique technology in audio equipment.
1.5’’ HF compression driver
600 W power capacity
A 12’’ transducer
123 dB SPL
The Mackie C300Z has a trapezoidal shape and comes with fly points, making it easier for you to hang them on supports.
Not to mention, this speaker has a socket that helps you mount it. Thanks to its trapezoidal shape and design, the Mackie C300Z can be used as a floor monitor, too.
The Mackie c300z has a 90° x 45° dispersion angle. This speaker also packs a compression driver, which is installed on a multi-celled aperture, improving the directivity of the sound so that listeners can hear everything clearly no matter where they are positioned.
In terms of the technology employed, the Mackie C300Z uses a unique low impedance compensated crossover design with great beamwidth patterns to produce natural sound at different volume levels.
It is also effective in reproducing high and mid-range frequencies, delivering sound with good voice clarity.
With the Alphasonik PKG 15", you'll be amazed at how loud these speakers will sound with their wide coverage horn tweeter and the amount of bass power they can output with their finely tuned aerodynamic ports.
Founded in 1976, Alphasonik has a rich history of producing all types of audio equipment. The company’s expertise is diverse; they specialize in car speakers, personal headphones, amplifiers, and DJ speakers.
The PKG series features four speakers of different sizes and capabilities, with the 15” speaker being the largest of the four.
2400 watts peak power handling
44Hz-18Hz frequency response
Designed to be used in outdoor events and house parties, the Alphasonik 15″ comes with a tripod stand for improving sound dispersion and directivity. It also incorporates handles and two small roller wheels in its design, making it easier for you to either carry or push it.
As with most DJ speakers for house parties, the Alphasonik PKG 15″ has a 1″ horn-shaped titanium tweeter for handling high-frequencies. It also packs a high-quality woofer, which has a graphite y-30 magnet with a 2’’ Kapton double-layered voice coil for delivering high-quality sound.
With a built-in equalizer, this powered speaker gives you total control over your music, making it easier for you to get a high-quality mix. It features EQ knobs for adjusting the high and low frequencies.
Thanks to the superb input versatility, the Alphasonik PKG 15″ can integrate seamlessly with devices through the RCA, aux, and XLR connector.
QSC started out as a company for manufacturing amplifiers and ventured into other types of audio equipment, establishing itself as a high-quality brand. With time, powered speakers such as the K10, K12, and K8 started infiltrating the market due to their impressive performance.
Frequency response of 60Hz-18Hz
Class D bi-amplification
A 10” transducer
RCA, XLR, and TRS input
Simply put, the K10 lies in between the K12 model and the K8 model, combining power with portability.
Since the QSC K10 has a sturdy build, it can handle some small impacts while you are transporting it from one venue to another. The enclosure is manufactured from ABS with a matte black finish.
Speaking of portability, the powered speaker features handles on the side of the cabinet and the top. Not to mention, it is only 14.5 KGs or 32 lbs.
This powered speaker has a clear, crisp sound with minimal distortion. And despite its small size, it has powerful amplifier capabilities that make it suitable for small events and parties. Not to mention, the QSC K10 projects sound excellently with a maximum SPL of 129 dB.
The QSC K10 also has superb digital technology on board. For instance, if it doesn’t detect any audio signal for five minutes, it enters into an automatic standby mode, switching off the amp and saving power.
Additionally, the speaker produces low idle noise on standby mode, which is barely audible.
Because the bass produced by a speaker can make a big difference in the overall sound quality, Rockville capitalized on that when designing the BPA15 – a party speaker with superb bass.
Frequency response of 60Hz-18KHz
Class D bi-amplification
RCA, XLR, and TRS input
Designed to be used as a portable speaker, the Rockville BPA15 features a handle and built-in wheels on a trapezoidal cabinet, giving mobile DJs an easy time while moving. Thanks to the 15” woofer that comes with a 2.5” KSV voice call, the Rockville BPA15 provides superb bass clarity, making it a strong contender if you are looking for a speaker with good bass.
With a 1″ titanium diaphragm compression driver, you’d be forgiven for assuming that the high-frequency reproduction is not good, but that’s not the situation. Highs are reproduced effectively to deliver a high-quality sound.
The speaker is equipped with a 2-band equalizer, giving you better control over the bass and treble response.
Unlike other outdoor party speakers that lose clarity at loud volumes, the Rockville BPA15 doesn’t sacrifice sound clarity for pure volume.
Bear in mind that clarity will take a dip when streaming over Bluetooth due to lossy conversion.
When it comes to choosing DJ speakers for house parties, everything boils down to the sensitivity, frequency response, and angle dispersion. You need active speakers that can present the high and lows without compromising the audio quality to produce a clear sound
The portability of the speakers is another important factor that should be put into consideration as you are looking for indoor/outdoor party speakers. While most DJ speakers are rather big, they feature various design aspects that improve portability for mobile DJs.
At the end of the day, you don’t want to be stuck with something that is too heavy and cumbersome, but we’re confident that all the options on this list will be easy for you to manage.
How Many Watts Are Suitable For A Portable Speaker?
House party speakers should be able to handle anything between 300 watts to 1500 watts.
However, it all boils down to the size of the event that you are hosting. Party speakers usually have a max SPL that ranges from 126dB to 129dB, producing a loud sound that can be heard by many people.
What Is The Difference Between DJ Speakers For House Parties VS For Home Use?
The biggest difference between DJ speakers for house parties and speakers for home use is the sensitivity. Most DJ speakers for house parties have a higher sensitivity compared to DJ speakers for home use (as party speakers are usually louder). Some home DJ speakers can also double up as outdoor party speakers.
Also, DJ speakers for house parties and events might come with some extra gear for boosting the sound dispersion, even if it’s just a stand for increasing the overall projection.
What Type of Speakers Are Good for DJing?
Since most PA speakers can reach a higher volume than other speakers, they are ideal for DJing. A PA system is made up of multiple devices such as microphones, loudspeakers, and amplifiers.
Such equipment is quite effective in increasing the volume of the sound so that it can reach a larger audience.
On the other hand, studio speakers are ideal for playing sounds at low volumes with flat frequency response, giving you insight into tiny details. Due to this, they might not be suitable for parties or events with a large crowd. Studio speakers such as active studio monitors will also get damaged much more easily and are not made to be knocked around unlike DJ and PA speakers.
Do You Need A Full Portable PA System Or Powered speakers?
Powered speakers have in-built amplifiers, making it easier for you to connect a mixer or a source of sound directly to the speakers. This streamlines the whole process, saving you from the trouble of looking for a high-quality amplifier.
Active speakers can also reduce cable clutter due to few connections. Comparatively, a passive PA system can be hectic to set up as you have a lot more speaker cable to deal with.