In this article, we go over the best boom arm and mic stand for your Shure SM7B. All of the microphone stands in this article support the weight of the SM7B, which is 4.4lbs, or 2kgs.
If you are looking for a desktop microphone stand, the best mic stand for the Shure SM7B is the Rode DS-1. If you are looking for a boom arm, the best one on the market is the Rode PSA 1+.
What Is The Best General Microphone Stand For Shure SM7B?
RØDE DS-1 Microphone Desktop Stand
A sturdy, lightweight, low-profile metal stand that is ideal for table-top use in applications such as podcasting and home recording.
- Fairly cheap
- Fits with a wide variety of microphones
- Adjustable height
Specs:
- 7.72 x 1.89 x 10.91 inches
- 2.16 pounds
- Sturdy, lightweight, low-profile
- Tube Materials: Steel, Aluminum
While the RØDE DS1 is designed to support a wide variety of microphones, the stand also works great for the Shure SM7B.
It features an adjustable height weight between 11 to 15.74 inches and includes two table clips and a 3/8 to 5/8″ adapter.
Pros
- The stand is fairly cheap at around $40
- The bottom disk doesn’t take up too much space on the desk
- Fits with a wide variety of microphones including the SM7B, Blue Yeti, Rode
Cons
- The base isn’t very wide so it is more prone to wobble
- It also is liable to tip or not be able to support heavier microphones for some users
What Is The Best Boom Arm for Shure SM7B?
RØDE PSA1+
Perfect for radio, broadcast, or home use, the Rode PSA1+ studio boom arm will take your audio production to the next level.
- Sleek design
- Innovative parallelogram spring design
- Ideal for podcasters and streamers
Specs:
- Full 360-degree rotation
- 820mm horizontal reach
- 840mm vertical reach
- Touch-Fastener Cable Wraps
- Desk-clamp included
The RØDE PSA1+ microphone boom arm is the most popular boom arm on the market and works great for the Shure SM7B.
It does not come with a shock mount, but you won’t need a shock mount with an SM7B anyways. It can handle the weight of an SM7B which is 4.4 pounds.
For a full in-depth review of the PSA series, check out these articles:
Pros:
- The installation process is simple and easy to setup
- Most popular boom arm for microphones
- Easy to adjust the placement of the microphone with 360 degrees of swivel
- The horizontal and vertical reach is great for the price
- It can hold heavy microphones and keep them stable
Cons:
- It does not have a slot to hide the cable in so the cable management is difficult
- Fairly expensive for a boom arm at $100
Summing Up
We’ve reviewed the top boom arm and desktop stand for the Shure SM7B here and both of the winners are from the same company!
The Rode PSA-1 and DS-1 are two of the most popular products that stabilize the Shure SM7B among users, and we’d highly recommend them for your setup.
With a super-easy setup and highly simple designs, these are great choices to stabilize your microphones.
FAQs
Does Shure SM7B Come With A Boom Arm?
No, unfortunately, the Shure SM7B does not come with a boom arm. Almost every microphone on the market will not come with a mic stand or boom arm.
You will have to purchase one separately to be able to stabilize your SM7B in one place while you record.
Do I Need A Shock Mount With Shure SM7B?
No, you do not need a shock mount with a sure SM7B. The SM7B has internal shock mounting.
Does Shure SM7B Come With A Stand?
No, the Shure SM7B does not come with a stand. It comes with the parts needed to attach to a third-party stand. You do not need a shock mount with the SM7B, though.
Can I Take The Wind Screen Off Of The SM7B?
The SM7B comes with a windscreen, which is the foam cylinder piece that goes over the microphone. Taking this off will give you a crisper sound and open up the top end of the microphone to add more clarity.
But, if you do this, it will be a good idea to set up a pop-filter in between to avoid unnecessary popping sounds with consonants.
How Should I Place The SM7B?
It will depend on how you’re using it.
To get that big radio voice effect for podcasts, voiceovers, and streaming, it is recommended to get as close as possible to the microphone with the windscreen (foam piece) placed on top.
This will increase the low end of the sound and make for a big and more appealing sound.
Does Rode PSA1 Work With Shure SM7B?
Not only does a Rode PSA1 work with a Shure SM7B, but it is also the top-rated boom arm for the SM7B (listed in this article).
Furthermore, it may be the most popular boom arm for the SM7B in general. It can support between 700 to 1,100 grams of weight which is right in the range of the Shure SM7B Microphone and costs $100.
How Do I Make My Shure SM7B Sound Better?
One thing to make it sound better for podcasts or streaming is simply to put the microphone as close as possible to your mouth with the foam cover on top of the diaphragm.
This will allow your voice to sound bigger while avoiding too many plosive consonant sounds. Another way is to adjust the EQ on the back of the microphone with a toothpick (or similar object).
Bring up the right side to make your voice sound brighter and bring down the left side to take out some low end from your voice.
You may also want to consider picking up a Cloudlifter or a Cloudlifter alternative to ensure you’re getting a healthy amount of signal into your SM7B. Find out why you need an in-line preamp here.